MCB11C14 Datasheet PDF - KEIL

MCB11C14 is a Keil MCB1000 evaluation board which enables to create and test working programs based on the NXP LPC11C14FB48/301 ARM Cortex-M0 processor based device with CAN interface. The NXP LPC11C14FB48/301 microcontroller provided with the MCB1000 board is a high end Cortex-M device with advanced ADC and serial I/O capabilities. This device include a serial wire debug interface for downloading and debugging. They do not support a JTAG interface. A 12MHz crystal provides the clock signal for the CPU. The Cortex debug connector provides support for serial wire debug feature of the Cortex-M device. The MCB1000 board connects the on chip serial UART to the ST3232 which converts the logic signals to RS232 voltage levels.

● 50MHz ARM Cortex-M0 processor based MCU in 48 pin LQFP

● Serial interface

● Potentiometer for ADC input

● Up to 42 GPIO

● 8 User LEDs + power

● 4 push buttons (2 GPIO, ISP, & reset)

● Power via USB connector

● 10 pin Cortex debug interface connector

● CAN 2.0 interface

●Do not attach additional power supplies (such as batteries) while the USB supplies power to the MCB1000. This may harm the PC.