The MC74HC4538ADG is a dual precision Monostable Multivibrator identical in pinout to the MC14538B. The device inputs are compatible with standard CMOS outputs, with pull-up resistors, they are compatible with LSTTL outputs. This dual monostable multivibrator may be triggered by either the positive or the negative edge of an input pulse and produces a precision output pulse over a wide range of pulse widths. Because the device has conditioned trigger inputs, there are no trigger-inputs rise and fall time restrictions. The output pulse width is determined by the external timing components, Rx and Cx. The device has a reset function which forces the Q output low and the Q\ output high, regardless of the state of the output pulse circuitry.
● Unlimited rise and fall times allowed on the trigger inputs
● Output pulse is independent of the trigger pulse width
● Outputs directly interface to CMOS, NMOS and TTL
● High noise immunity characteristic of CMOS devices
● In compliance with the requirements defined by JEDEC standard no. 7A
● ±10% Guaranteed pulse width variation from part to part (using the same test jig)
● 10 LSTTL Load output drive capability
● 1mA Low input current
