The MC10EL/100EL33 is an integrated ÷4 divider. The differential clock inputs and the V allow a differential, single-ended or AC coupled interface to the device. If used, the V output should be bypassed to ground with a 0.015F capacitor. Also note that the V is designed to be used as an input bias on the EL33 only, the V output has limited current sink and source capability. The reset pin is asynchronous and is asserted on the rising edge. Upon power-up, the internal flip-flops will attain a random state; the reset allows for the synchronization of multiple EL33"s in a system.The 100 Series contains temperature compensation.
●Features
●---
● |
● 650ps Propagation Delay
● 4.0GHz Toggle Frequency
● ESD Protection: > 1 KV HBM, > 100 V MM
● PECL Mode Operating Range: VCC= 4.2 V to 5.7 V with VEE= 0 V
● NECL Mode Operating Range: VCC= 0 V with VEE= -4.2 V to -5.7 V
● Internal Input Pulldown Resistors on CLK(s) and R.
● Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
● Moisture Sensitivity Level 1
●For Additional Information, see Application Note AND8003/D
● Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34
● Transistor Count = 95 devices
● Pb-Free Packages are Available
