The MAX7060ATG/V+ from Maxim Integrated Products is a 280MHz to 450MHz programmable ASK/FSK transmitter in 24 pin TQFN package. This device incorporates a fully integrated fractional-N synthesizer which allows the user to set the RF operating frequency to a large fraction of 280MHz to 450MHz frequency range with a single crystal. The RF output power is user-controlled between +14dBm and -14dBm with a 5V supply or with battery voltages as low as 3.2V. At the minimum specified battery voltage of 2.1V, the RF output power-control range is between +10dBm and -14dBm. To maintain a good output power match it also contains a programmable matching capacitor connected in parallel with the power amplifier output. ASK modulation is accomplished by switching the PA on and off, so excellent modulation (on/off) ratios are achieved. FSK modulation is accomplished by changing the coefficients of the high-resolution fractional-N synthesizer, so FSK deviation is extremely accurate.
● Single supply operation ranging from 2.1V to 3.6V
● 4.5V to 5.5V supply operation with internal regulators
● Start-up time is very short and data can be transmitted 250µs after the enable command
● 50Kbps Manchester data rate ASK, 70Kbps Manchester data rate FSK
● 28dB power control range in 1dB steps
● Tuneable PA matching capacitor
● Control through SPI or manual settings
● 400nA standby current, power-on-reset (POR) active
● 5nA shutdown current, POR inactive
● Operating temperature range from -40°C to 125°C, automotive AEC-Q100 grade-1 qualified
