MAX660ESA+ Datasheet PDF - Maxim Integrated

The MAX660 monolithic, charge-pump voltage inverter converts a +1.5V to +5.5V input to a corresponding -1.5V to -5.5V output. Using only two low-cost capacitors, the charge pump"s 100mA output replaces switching regulators, eliminating inductors and their associated cost, size, and EMI. Greater than 90% efficiency over most of its load-current range combined with a typical operating current of only 120µA provides ideal performance for both battery-powered and boardlevel voltage conversion applications. The MAX660 can also double the output voltage of an input power supply or battery, providing +9.35V at 100mA from a +5V input.

● Small Capacitors

● 0.65V Typ Loss at 100mA Load

● Low 120µA Operating Current

● 6.5R Typ Output Impedance

● Guaranteed ROUT < 15R for C1 = C2 = 10µF

● Pin-Compatible High-Current ICL7660 Upgrade

● Inverts or Doubles Input Supply Voltage

● Selectable Oscillator Frequency: 10kHz/80kHz