MAX213IDBR Datasheet PDF - TI

The MAX213IDBR is a RS-232 multichannel Line Driver/Receiver consists of four line drivers, five line receivers and a dual charge-pump circuit with ±15kV ESD protection pin-to-pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signalling rates up to 120kbps and a maximum of 30V/µs driver output slew rate. The MAX213 has an active-low shutdown (SHDN) and an active-high enable control (EN). In shutdown mode, the charge pumps are turned off, V+ is pulled down to VCC, V- is pulled to GND and the transmitter outputs are disabled. This reduces supply current typically to 1µA. Two receivers of the MAX213 are active during shutdown.

● Designed to be interchangeable with Maxim MAX213

● Latch-up performance exceeds 100mA per JESD 78, class II

● 15µA Typical low supply current in shutdown mode

● 4 x 0.1µF External capacitors

● Green product and no Sb/Br