MA180029 Datasheet PDF - Microchip

The PIC18F47J53 FS USB PIM Demo Board is a full-speed USB demonstration and development board featuring the PIC18F47J53 with XLP low power. The board can be operated either standalone or as a Plug-In Module (PIM) plugged into the PIC18 Explorer Board.

● Two miniature SMT red LEDs

● 12MHz SMT crystal which can be used with internal PLL to run the microcontroller and USB module

● MCP9701A Analogue output temperature sensor

● General purpose push button S2 connected through with a pull-up resistor

● Six-pin, right-angle in-circuit serial programming (ICSP ) programmer/debug header

● Jumpers for current measurement (JP3) and configuration (JP2)

● A mini-B USB connector for power and communication

● Full-speed (12 Mbps) and low-speed (1.5 Mbps) operation

● Support of control, interrupt, bulk and isochronous transfers

● Support of up to 32 endpoints, 3.8Kbytes of dual access RAM for USB or general purpose use