The LT1006CN8#PBF is a precision single-supply Operational Amplifier optimized for single supply operation with a full set of specifications at 5V. The LT1006 has a low offset voltage of 20µV, drift of 0.2µV/°C, offset current of 120pA, gain of 2.5million, common mode rejection of 114dB and power supply rejection of 126dB. Although supply current is only 340µA, a novel output stage can source or sink in excess of 20mA while retaining high voltage gain. Common mode input range includes ground to accommodate low ground-referenced inputs from strain gauges or thermocouples and output can swing to within a few mill volts of ground. If a higher slew rate (in excess of 1V/µs) or micropower operation (supply current down to 90µA) is required, the operating currents can be modified by connecting an external optional resistor to pin 8.
● Single-supply operation
● Input voltage range extends to ground
● Output swings to ground while sinking current
● Guaranteed offset voltage (50µV maximum)
● Guaranteed low drift (1.3µV/°C maximum)
● Guaranteed offset current (0.5nA maximum)
● Guaranteed high gain (1.5million minimum at 5mA and 0.8million minimum at 17mA load current)
● Guaranteed low supply current (520µA maximum)
● Supply current can be reduced by a factor of 4
● Low voltage noise (0.55µVP-P, 0.1 to 10Hz)
● Low current noise (0.07pA/√Hz at 10Hz)
● High input impedance (250MR minimum)
● 2.7V Minimum supply voltage
