| TYPE | DESCRIPTION |
|---|
| Number of Pins | 100 Pin |
| Case/Package | QFP100 |
| Clock Speed | 72.0 MHz |
| RAM Memory Size | 32768 B |
| FLASH Memory Size | 524288 B |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Not Listed by Manufacturer |
General description
●The LPC2364/65/66/67/68 microcontrollers are based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation that combines the microcontroller with up to 512 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at the maximum clock rate. For critical performance in interrupt service routines and DSP algorithms, this increases performance up to 30 % over Thumb mode. For critical code size applications, the alternative 16-bit Thumb mode reducescode by more than 30 % with minimal performance penalty.
●Applications
●Industrial control
●Medical systems
●Protocol converter
●Communications
NXP
Single-chip 16Bit/32Bit microcontrollers; up to 512KB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10Bit ADC/DAC
NXP
LPC2368FBD100 - ARM7 with 512KB flash, 58KB SRAM, Ethernet, USB 2.0 Device, CAN, SD/MMC, and 10Bit ADC QFP 100Pin
NXP
Single-chip 16Bit/32Bit microcontrollers; up to 512KB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10Bit ADC/DAC
NXP
LPC2368FET100 - ARM7 with 512KB flash, 58KB SRAM, Ethernet, USB 2.0 Device, CAN, SD/MMC, and 10Bit ADC BGA 100Pin
NXP
ARM7 microcontroller; Flash:512kx8bit; SRAM:59392B; 72MHz
NXP
Single-chip 16Bit/32Bit microcontrollers; up to 512KB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10Bit ADC/DAC
NXP
MCU 16Bit/32Bit LPC2300 ARM7TDMI-S RISC 512KB Flash 3.3V 100Pin LQFP Tray
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
