The L9613 is a monolithic integrated circuit containing standard ISO 9141 compatible interface functions.
●Key Features
● Operating power supply voltage range4.8V ≤ VS ≤ 36V (40V for transients)
● Reverse supply (battery) protected down toVS ≥ -24V
● Standby mode with very low current consumption ISSB ≤ 1mA @ VCC ≤ 0.5V
● Min. possible Baud rate according to ISO9141 ≥ 130 kBaud
● Low quiescent current in off condition ISOFF = 120μA
● TTL compatible TX input
● Bidirectional K-I/O pin with supply voltage dependent input threshold
● Over temperature shut down function selective to K-I/O pin
● Wide input and output voltage range:-24V ≤ VK ≤ VS
● K output current limitation, typ. IK = 60mA
● Defined OFF output status in under voltage condition and VS or GND interruption
● Controlled output slope for low EMI
● High input impedance for open VS or GND connection
● Defined output ON status of LO or RX for open LI or K inputs
● Defined K output OFF for TX input open
● Integrated pull up resistors for TX, RX and LO
● EMI robustness optimized
