| TYPE | DESCRIPTION |
|---|
| Number of Pins | 28 Pin |
| Supply Voltage (DC) | 8.00 V (min) |
| Case/Package | HTSSOP |
| Number of Outputs | 2 Output |
| Output Voltage | 3.30 V |
| Output Current | 2.50 A |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Cut Tape (CT) |
The DRV8814PWPR is a 2.5A dual brushed DC Motor Driver with inrush protection. This device has two H-bridge drivers and is intended to drive DC motors. The output driver block for each consists of N-channel power MOSFET"s configured as H-bridges to drive the motor windings. The DRV8814 can supply up to 2.5A peak RMS output current (with proper heat sinking at 24V and 25°C) per H-bridge. A simple parallel digital control interface is compatible with industry-standard devices. Decay mode is programmable to allow braking or coasting of the motor when disabled. Internal shutdown functions are provided for over-current protection, short-circuit protection, under-voltage lockout and over-temperature.
● Dual-H-bridge current-control motor driver
● Low MOSFET on-resistance
● Industry standard parallel digital control interface
● Green product and no Sb/Br
TI
2.5A Dual Brushed DC motor Driver with Inrush Protection (PH/EN Ctrl)
TI
TEXAS INSTRUMENTS DRV8814PWPR DC Motor Driver Dual, 8V to 45V supply, 3.3V/2.5A/2Outputs, HTSSOP-28
TI
2.5A Dual Brushed DC motor Driver with Inrush Protection (PH/EN Ctrl) 28-HTSSOP -40℃ to 85℃
TI
TEXAS INSTRUMENTS DRV8814EVM Evaluation Board, DC Brushed Motor, MSP430 Signal Control, Inrush Protection
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
