| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 16 Pin |
| Supply Voltage (DC) | 8.20 V (min) |
| Case/Package | HTSSOP-16 |
| Number of Outputs | 4 Output |
| Output Current | 1.50 A |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
The DRV8803PWP is a 4-channel Low Side Driver with overcurrent protection. It has built-in diodes to clamp turnoff transients generated by inductive loads and can be used to drive unipolar stepper motors, DC motors, relays, solenoids or other loads. It can supply up to 2A (one channel on) or 1A (four channels on) continuous output current per channel, at 25°C with proper PCB heat sinking. The device is controlled through a simple parallel interface. Internal shutdown functions are provided for overcurrent protection, short-circuit protection, under-voltage lockout and over-temperature and faults are indicated by a fault output pin.
● Four NMOS FETs with overcurrent protection
● Integrated inductive clamp diodes
● Parallel interface
● Green product and no Sb/Br
TI
2A Unipolar Stepper Motor or 1A Quad Solenoid/Relay Driver (PWM Ctrl)
TI
2A Unipolar Stepper Motor or 1A Quad Solenoid/Relay Driver (PWM Ctrl) 20-SOIC -40℃ to 85℃
TI
2A Unipolar Stepper Motor or 1A Quad Solenoid/Relay Driver (PWM Ctrl) 16-HTSSOP -40℃ to 85℃
TI
2A Unipolar Stepper Motor or 1A Quad Solenoid/Relay Driver (PWM Ctrl) 20-SOIC -40℃ to 85℃
TI
2A Unipolar Stepper Motor or 1A Quad Solenoid/Relay Driver (PWM Ctrl) 16-HTSSOP -40℃ to 85℃
TI
DRV8803 Motion Motor Control Evaluation Board
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
