The DAC108S085CIMT is a full-featured general purpose octal 10-bit voltage-output Digital-to-analog Converter (DAC) operates from a single 2.7 to 5.5V supply and consumes 1.95mW at 3V and 4.85mW at 5V. The on-chip output amplifiers allow rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40MHz over the entire supply voltage range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE and DSP interfaces. The DAC108S085 also offers daisy chain operation where an unlimited number of DAC108S085 can be updated simultaneously using a single serial interface. One reference input serves channels A through D while the other reference serves channels E through H. Each reference can be set independently between 0.5V and VA, providing the widest possible output dynamic range. The DAC108S085 has a 16-bit input shift register that controls the mode of operation, the power-down condition and the DAC channels register/output value.
● Ensured monotonicity
● Low power operation
● Rail-to-rail voltage output
● Power-ON reset to 0V
● Simultaneous output updating
● Individual channel power down capability
● Setting time - 6µs maximum
● Zero code error - 15mV maximum
● Full-scale error -0.75%FS maximum
● Green product and no Sb/Br
