CRIMPFOX CENTRUS 10S Datasheet PDF - Phoenix

The CRIMPFOX CENTRUS 10S from Phoenix Contact is a hand crimping plier with automatic adjustment. The plier can be used with both uninsulated and insulated ferrules, DIN 46228 part 1 and 4 from 0.14mm² to  10mm², also for TWIN ferrules up to 2 x 4mm², automatic cross section adjustment, lateral insertion, equipped with fall protection. The crimping pliers automatically adjust to the respective cross-section and prevent user errors caused by an incorrect hole selection. This allows you to process a wide variety of ferrules quickly and in a process-reliable manner. Its compact, ergonomic design enables simple, effortless use, even when extremely low operating forces are present.

●1213154, GTIN UPC EAN: 4055626212623

● Ergonomic handle design ensures comfortable, fatigue-free handling

● With a particularly small handle width, the tool fits perfectly in your hand

● Sturdy plastic guard over the head of the pliers protects the tool against damage caused by dropping

● Up to 30% lower actuation force due to optimized leverage

● Pressure lock ensures consistently high quality crimping results

● Length is 180mm, width is 70mm

● Colour is black, square crimp compression, EAC approved

● Insulated and uninsulated ferrule contacts, designation is crimping position 1

● Minimum cross section is 0.14mm², maximum cross section is 10mm²