| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Frequency | 3.50 GHz |
| Number of Pins | 32 Pin |
| Supply Voltage (DC) | 2.38 V to 3.80 V |
| Case/Package | LQFP |
| Number of Outputs | 10 Output |
| Supply Current | 85.0 mA |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Bulk |
The CDCLVP110 clock driver distributes one differential clock pair of either LVPECL or HSTL (selectable) input, (CLK0, CLK1) to ten pairs of differential LVPECL clock (Q0, Q9) outputs with minimum skew for clock distribution. The CDCLVP110 can accept two clock sources into an input multiplexer. The CLK0 input accepts either LVECL/LVPECL input signals, while CLK1 accepts an HSTL input signal when operated under LVPECL conditions. The CDCLVP110 is specifically designed for driving 50-Ω transmission lines.
●The VBB reference voltage output is used if single-ended input operation is required. In this case the VBB pin should be connected to CLK0 and bypassed to GND via a 10-nF capacitor.
●However, for high-speed performance up to 3.5 GHz, the differential mode is strongly recommended.
●The CDCLVP110 is characterized for operation from –40°C to 85°C.
TI
the cdclvp110 clock driver distributes one differential clock pair of either lvpecl or hstl (selectable) input (clk0 ...
TI
Clock Multiplexer 10Out 2IN 1:10 32Pin LQFP Tray
TI
Clock Fanout Buffer 2Out 1IN 1:2 16Pin VQFN EP T/R
TI
Clock Fanout Buffer 2Out 1IN 1:2 16Pin VQFN EP T/R
TI
Clock Multiplexer 10Out 2IN 1:10 32Pin LQFP T/R
TI
Clock Multiplexer 10Out 2IN 1:10 32Pin LQFP Tray
TI
Clock Multiplexer 10Out 2IN 1:10 32Pin LQFP T/R
TI
Clock Multiplexer 10Out 2IN 1:10 32Pin LQFP T/R
TI
Clock Multiplexer 10Out 2IN 1:10 32Pin LQFP T/R
TI
CDCLVP1102 Clock Buffer and Driver Evaluation Board
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
