The CDCEL913PW is a 1-PLL programmable VCXO Clock Synthesizer with 1.8V LVCMOS outputs. It generates up to three output clocks from a single input frequency. Each output can be programmed in-system for any clock frequency up to 230MHz, using the integrated configurable PLL. It has separate output supply pins, VDDOUT. The input accepts an external crystal or LVCMOS clock signal. A selectable on-chip VCXO allows synchronization of the output frequency to an external control signal. The PLL supports SSC (spread-spectrum clocking) for better electromagnetic interference (EMI) performance. The device supports non-volatile EEPROM programming for easy customization of the device to the application. The settings are programmable through the SDA/SCL bus, a 2-wire serial interface.
● Member of programmable clock generator
● Flexible clock driver
● Programmable SSC modulation
● Enables 0-PPM clock generation
● Generates common clock frequencies used with Texas Instruments DaVinci, OMAP and DSPs
● Serial programmable volatile register
● Non-volatile EEPROM to store customer settings
● PLL loop filter components integrated
● Green product and no Sb/Br
