General Description
●The CD4051BC, CD4052BC, and CD4053BC analog multiplexers/demultiplexers are digitally controlled analog
●switches having low “ON” impedance and very low “OFF” leakage currents. Control of analog signals up to 15V
●p-p can be achieved by digital signal amplitudes of 3−15V. For example, if VDD =5V, VSS =0V and VEE = −5V, analog signals from −5V to +5V can be controlled by digital inputs of 0−5V. The multiplexer circuits dissipate extremely low quiescent power over the full VDD−VSS and VDD−VEE supply voltage ranges, independent of the logic state of the control signals. When a logical “1” is present at the inhibit input terminal all channels are “OFF”.
●Features
●■Wide range of digital and analog signal levels: digital 3 – 15V, analog to 15Vp-p
●■Low “ON” resistance: 80Ω(typ.) over entire 15Vp-p signal-input range for VDD −VEE =15V
●■High “OFF” resistance: channel leakage of ±10 pA (typ.) at VDD −VEE =10V
●■Logic level conversion for digital addressing signals of 3 – 15V (VDD −VSS =3 – 15V) to switch analog signa
●to 15 Vp-p(VDD −VEE =15V)
●■Matched switch characteristics: ∆RON =5Ω(typ.) for VDD −VEE =15V
●■Very low quiescent power dissipation under all digital-control input and supply conditions: 1 µW (typ.) at VDD −VSS =VDD −VEE =10V
●■Binary address decoding on chip
