CC1020 is a true single-chip UHF transceiver designed for very low-power and very low-voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific, and Medical) and SRD (Short Range Device) frequency bands at 402-, 424-, 426-, 429-, 433-, 447-, 449-, 469-, 868-, 915-, and 960-MHz, but can easily be programmed for multichannel operation at other frequencies in the 402- to 470-MHz and 804- to 960-MHz range.
●The CC1020 device is especially suited for narrow-band systems with channel spacing of 12.5 or 25 kHz complying with ARIB STD-T67 and EN 300 220.
●The main operating parameters of the CC1020 device can be programmed with a serial bus, thus making CC1020 a very flexible and easy-to-use transceiver.
●In a typical system, the CC1020 device will be used together with a microcontroller and a few external passive components.
●TI recommends using the latest RF performance line device CC1120 as successor of CC1020: www.ti.com/rfperformanceline
● True Single Chip UHF RF Transceiver
● Frequency Range 402 MHz to 470 MHz and
●804 MHz to 960 MHz
● High Sensitivity
● Up to –118 dBm for a 12.5 kHz Channel
● Programmable Output Power
● Low Current Consumption
● RX: 19.9 mA
● Low Supply Voltage
● 2.3 V to 3.6 V
● No External IF Filter Needed
● Low-IF Receiver
● Very Few External Components Required
● Small Size
● QFN 32 Package
● Pb-Free Package
● Digital RSSI and Carrier Sense Indicator
● Data Rate up to 153.6 kBaud
● OOK, FSK, and GFSK Data Modulation
● Integrated Bit Synchronizer
● Image Rejection Mixer
● Programmable Frequency and AFC Make Crystal
●Temperature Drift Compensation Possible Without
●TCXO
● Suitable for Frequency Hopping Systems
● Suited for Systems Targeting Compliance With
●EN 300 220, FCC CFR47 Part 15, ARIB STD-T67,
●and ARIB STD-T96
● Development Kit Available
● Easy-to-Use Software for Generating the CC1020
●Configuration Data
