The CAT4238 is a DC-DC step-up converter that delivers an accurate constant current ideal for driving LEDs. Operation at a fixed switching frequency of 1 MHz allows the device to be used with small value external ceramic capacitors and inductor. LEDs connected in series are driven with a regulated current set by the external resistor R1. LED currents up to 40 mA can be supported over a wide range of input supply voltages up to 5.5 V, making the device ideal for battery-powered applications. The CAT4238 high-voltage output stage is perfect for driving mid-size and large panel displays containing up to ten white LEDs in series. LED dimming can be done by using a DC voltage, a logic signal, or a pulse width modulation (PWM) signal. The shutdown input pin allows the device to be placed in power-down mode with "zero" quiescent current. In addition to thermal protection and overload current limiting, the device also enters a very low power operating mode during "Open LED" fault conditions.
●Features
●---
● |
● Drives High Voltage LED strings (38 V)
● Up to 87% Efficiency
● Low Quiescent Ground Current 0.6 mA
● Adjustable Output Current
● 1 MHz Fixed Frequency Low noise Operation
● Soft start “in-rush” current limiting
● Shutdown current less than 1 µA
● Open LED Overvoltage Protection
● Automatic Shutdown at 1.9 V (UVLO)
● Thermal overload protection
● Mid-size and Large Panel Displays
