The ATMEGA328P-PN is a high-performance picoPower 8-bit AVR RISC-based Microcontroller combines 32kb ISP flash memory with read-while-write capabilities, 1024B EEPROM, 23 general purpose I/O lines, 32 general purpose working registers, three flexible timer/counters with compare modes, internal and external interrupts, serial programmable USART, a byte-oriented 2-wire serial interface, SPI serial port, a 6-channel 10-bit A/D converter (8-channels in TQFP and QFN/MLF packages), programmable watchdog timer with internal oscillator and five software selectable power saving modes. The device operates between 1.8 to 5.5V. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.
● High-performance, Low-power AVR® 8-Bit Microcontroller
● Advanced RISC Architecture
● High Endurance Non-volatile Memory Segments
● Atmel® QTouch® Library Support
● Power-on Reset and Programmable Brown-out Detection
● Internal Calibrated Oscillator
● External and Internal Interrupt Sources
● Idle, ADC Noise Reduction, Power-save, Power-down, Standby and Extended Standby Sleep Modes
● 0 to 20MHz at 4.5 to 5.5V Speed Grade
● 0.2mA Active mode, 0.1µA Power-down mode, 0.75µA (32kHz RTC) Power-save mode power consumption
