The ATAVRMC303 is the device board for ATxmega128A1 AVR microcontroller which can be connected to the general purpose power stage board MC300 for driving brushless DC, brushed DC and stepper motors. This board is also designed to be connected on any other driver board which could share the same interface. Power and all signals needed for a power stage board are available on the right side of the board. Jumpers allow demonstrating sensor or sensorless modes of motor control, interfaces like USB or Atmel DB101 display module is also available. The MC303 motor control processor board is an ATxmega128A1 AVR microcontroller solution connected to a power stage board intended for driving DC motors. All signals coming from the power stage board are connected to the microcontroller either directly or through jumpers for sensorless or sensor configuration. external comparators present on the board or internal comparators of the ATxmega128A1 allow for sensorless control mode.
● Motor control device board for Atmel ATxmega128A1
● Modular system with 2.54mm pin header connector for power board MC300
● Sensor & sensorless modes capabilities
● Hall sensor header, Potentiometer for motor control
● Headers for Atmel DB101 display module
● USB interface for PC connection and usage of Atmel motor control centre software
● ISP & debug interface for both ATxmega128A1 & USB device
● Supplied with power board MC300 from 3.3V up to 5V
