| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Frequency | 2.00 MHz |
| Number of Pins | 8 Pin |
| Supply Voltage (DC) | 1.80 V (min) |
| Case/Package | SOIC |
| Clock Speed | 2.00 MHz, 250 kHz (max) |
| Memory Size | 125 B |
The AT93C46DN-SH-B is a MICROWIRE-compatible 1kB 3-wire serial Electrically Erasable Programmable Read-Only Memory (EEPROM) organized as 64 words of 16-bit each (when the ORG pin is connected to VCC) and 128 words of 8-bit each (when the ORG pin is tied to ground). The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operations are essential. The AT93C46D is enabled through the chip select pin (CS) and accessed via a 3-wire serial interface consisting of data input (DI), data output (DO) and shift clock (SK). Upon receiving a read instruction at DI, the address is decoded and the data is clocked out serially on the DO pin. The write cycle is completely self-timed and no separate erase cycle is required before Write. The write cycle is only enabled when the part is in the Erase/write enable state. When CS is brought high following the initiation of a write cycle, the DO pin outputs the ready/busy status of the part.
● Low-voltage operation
● User-selectable internal organization
● 2MHz Clock rate (5V)
● Self-timed write cycle (5ms maximum)
● High reliability
● Endurance - 1000000 write cycles
● Data retention - 100 years
ATMEL
21 Pages / 0.78 MByte
ATMEL
21 Pages / 0.9 MByte
ATMEL
1 Pages / 0.12 MByte
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
