AT91SAM9G20-EK Evaluation Kit enables the evaluation of and code development for applications running on an AT91SAM9G20 device. The board supports the AT91SAM9G20 in a 217-ball LFBGA package. The AT91SAM9G20 is based on the integration of an ARM926EJ-S processor with fast ROM and RAM memories and a wide range of peripherals. The AT91SAM9G20 is architectured on a 6 layer matrix, allowing a maximum internal bandwidth of six 32bit buses. It also features an External Bus Interface capable of interfacing with a wide range of memory devices.
● 256Mbytes of NAND Flash memory
● Serial dataFlash, TWI serial EEPROM
● One USB Device port interface, two USB Host port interfaces
● One DBGU serial communication port
● One complete MODEM serial communication port
● One additional serial communication port with RTS/CTS handshake control
● JTAG/ICE debug interface
● One PHY Ethernet 100-base TX with three status LEDs
● One on board audio DAC
● Two DataFlash SD/MMC card slots
●The board must not be subjected to high electrostatic potentials. A grounding strap or similar protective device should be worn when handling the board.
