AT91SAM9260-EK evaluation kit enables the evaluation of and code development for applications running on an AT91SAM9260 device. The board supports the AT91SAM9260 in an LFBGA217 package as well as in a PQFP208 package. The SAM9260 is based on the integration of an ARM926EJ-S processor with fast ROM and RAM memories and a wide range of peripherals. The SAM9260 embeds an Ethernet MAC, one USB Device Port, and a USB Host controller. It also integrates several standard peripherals, such as the USART, SPI, TWI, Timer Counters, Synchronous Serial Controller, ADC and Multimedia Card Interface. The SAM9260 is architectured on a 6 layer matrix, allowing a maximum internal bandwidth of six 32bit buses. It also features an external bus interface capable of interfacing with a wide range of memory devices.
● 64Mbytes of SDRAM memory
● 256Mbytes of NANDFlash memory
● Serial dataFlash, TWI serial EEPROM
● DBGU serial communication port
● MODEM serial communication port
● JTAG/ICE debug interface
● PHY Ethernet 100 base TX with three status LEDs
● AT73C213 audio DAC
● DataFlash, SD/MMC card slot
● Four expansion connectors (PIOA, PIOB, PIOC, IMAGE SENSOR)
●The board must not be subjected to high electrostatic potentials. A grounding strap or similar protective device should be worn when handling the board.
