The AMC1200STDUBRQ1 is a fully-differential precision Isolation Amplifier with the output separated from the input circuitry by a silicon dioxide (SiO2) barrier that is highly resistant to magnetic interference. This barrier is certified to provide galvanic isolation of up to 4250Vp according to UL1577 and VDE V 0884-10. Used in conjunction with isolated power supplies, this device prevents noise currents on a high common-mode voltage line from entering the local ground and interfering with or damaging sensitive circuitry. The input of the AMC1200-Q1 is optimized for direct connection to shunt resistors or other low-voltage level signal sources. The performance of the device supports accurate current control, resulting in system level power saving and (especially in motor-control applications) lower torque ripple. The common-mode voltage of the output signal is automatically adjusted to either the 3 or 5V low-side supply.
● ±250mV Input voltage range optimized for shunt resistors
● 0.075% at 5V Maximum very low nonlinearity
● 1.5mV Maximum low offset error
● 3.1mV RMS Typical low noise
● 8mA at 5V Maximum low high-side supply current
● 108dB High common-mode rejection ratio
● 3.3V Low-side operation
● 5100V Isolation voltage pulse/test peak
● 0.015% Maximum gain non-linearity
● Green product and no Sb/Br
