AM26LV31EIPWR Datasheet PDF - TI

The AM26LV31EIPWR is a quadruple differential Line Driver with 3-state outputs. This low-voltage high-speed driver has ±15kV ESD (HBM and IEC61000-4-2, Air-Gap Discharge) and ±8kV ESD (IEC61000-4-2, Contact Discharge) protection. This device is designed to meet TIA/EIA-422-B and ITU Recommendation V.11 drivers with reduced supply voltage. The driver is optimized for balanced-bus transmission at switching rates up to 32MHz. The outputs have high current capability for driving balanced lines, such as twisted-pair transmission lines and provide high impedance in the power-off condition.

● Meets or exceeds standards TIA/EIA-422-B and ITU recommendation V.11

● ESD protection for RS422 bus pins

● 8ns Typical propagation delay time

● 500ps Typical pulse skew time

● ±30mA High output-drive current

● 5ns Typical controlled rise and fall times

● IOFF supports partial power-down-mode operation

● Driver output short-circuit protection

● Glitch-free power-up/power-down protection

● Green product and no Sb/Br