AM26C32IN Datasheet PDF - TI

The AM26C32IN is a quadruple differential Line Receiver for balanced or unbalanced digital data transmission. The enable function is common to all four receivers and offers a choice of active-high or active-low input. The 3-state outputs permit connection directly to a bus-organized system. Fail-safe design specifies that if the inputs are open, the outputs always are high. The AM26C32 devices are manufactured using a BiCMOS process, which is a combination of bipolar and CMOS transistors. This process provides the high voltage and current of bipolar with the low power of CMOS to reduce the power consumption to about one-fifth that of the standard AM26LS32, while maintaining AC and DC performance.

● 3-state Outputs

● Input failsafe circuitry

● Improved replacements for AM26LS32 device

● Operates from a single 5V supply

● 10mA (ICC) Typical low power

● ±7V Common-mode range with ±200mV sensitivity

● 60mV Typical input hysteresis

● 17ns Typical tpd

● 2kV ESD

● 10Mbps Signalling rate