| TYPE | DESCRIPTION |
|---|
| Number of Pins | 16 Pin |
| Supply Voltage (DC) | 3.00 V (min) |
| Case/Package | SOIC |
| Supply Current | 7.00 mA |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
The ADUM5201 series dual-channel Digital Isolator with isoPower® an integrated isolated DC-to-DC converter. Based on the Analog Devices, Inc., iCoupler® technology, the DC-to-DC converter provides up to 500mW of regulated. It eliminates the need for a separate, isolated DC-to-DC converter in low power isolated designs. The iCoupler chip scale transformer technology is used to isolate the logic signals and for the magnetic components of the DC-to-DC converter. The result is a small form factor, total isolation solution. It provides two independent isolation channels in a variety of channel configurations and data rates. The isoPower uses high frequency switching elements to transfer power through its transformer. Special care must be taken during printed circuit board (PCB) layout to meet emissions standards.
● Up to 500mW output power
● Dual DC-to-25Mbps (NRZ) signal isolation channels
● >25kV/µs High common-mode transient immunity
ADI
Digital Isolator CMOS 2CH 25Mbps Automotive 16Pin SOIC W Tube
ADI
ANALOG DEVICES ADUM5201ARWZ Digital Isolator, 2Channel, 100ns, 4.5V, 5.5V, SOIC, 16Pins
ADI
ANALOG DEVICES ADUM5201CRWZ Digital Isolator, 2Channel, 70ns, 4.5V, 5.5V, SOIC, 16Pins
ADI
Digital Isolator CMOS 2CH 1Mbps 16Pin SOIC W T/R
ADI
Digital Isolator CMOS 2CH 25Mbps 16Pin SOIC W T/R
ADI
Digital Isolator CMOS 2CH 25Mbps Automotive 16Pin SOIC W T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
