The ADSP-2186NBSTZ-320 is a single-chip Digital Signal Processing Microcomputer is pin-compatible and is differentiated solely by the amount of on-chip SRAM. This feature, combined with ADSP-21xx code compatibility, provides a great deal of flexibility in the design decision. ADSP-2186N series members combine the ADSP-2100 family base architecture (three computational units, data address generators and a program sequencer) with two serial ports, a 16-bit internal DMA port, a byte DMA port, a programmable timer, Flag I/O, extensive interrupt capabilities and on-chip program and data memory. ADSP-2186N series members integrate up to 256K bytes of on-chip memory configured as up to 48K words (24-bit) of program RAM and up to 56K words (16-bit) of data RAM. Power down circuitry is also provided to meet the low power needs of battery-operated portable equipment.
● Single-cycle instruction execution
● Single-cycle context switch
● Low CMOS standby power dissipation with 200 CLKIN cycle recoveries from power-down condition
● Low power dissipation in idle mode
● Up to 48K words program memory RAM
● Up to 56K words data memory RAM
● Dual-purpose program memory for both instruction and data storage
● Two independent data address generators
● Powerful program sequencer provides zero overhead looping conditional instruction execution
● Programmable 16-bit interval timer with pre-scalar
● 80MHz Instruction rate
● 12.5ns Instruction cycle time at 1.8V (internal)
● 80 MIPS sustained performance
● 3-bus Architecture allows dual operand fetches in every instruction cycle
●ESD sensitive device. Electrostatic charges as high as 4000V readily accumulate on the human body and test equipment and can discharge without detection.
