ADP7118ACPZN-R7 Datasheet PDF - ADI

Product Details

●The ADP7118 is a CMOS, low dropout (LDO) linear regulator that operates from 2.7 V to 20 V and provides up to 200 mA of output current. This high input voltage LDO is ideal for the regulation of high performance analog and mixed-signal circuits operating from 20 V down to 1.2 V rails. Using an advanced proprietary architecture, the device provides high power supply rejection, low noise, and achieves excellent line and load transient response with a small 2.2 µF ceramic output capacitor. The ADP7118 regulator output noise is 11 μV rms independent of the output voltage for the fixed options of 5 V or less.

●The ADP7118 is available in 16 fixed output voltage options. The following voltages are available from stock: 1.2 V (adjustable), 1.8 V, 2.5 V, 3.3 V, 4.5 V, and 5.0 V.

●Additional voltages available by special order are 1.5 V, 1.85 V, 2.0 V, 2.2 V, 2.75 V, 2.8 V, 2.85 V, 3.8 V, 4.2 V, and 4.6 V.

●Each fixed output voltage can be adjusted above the initial set point with an external feedback divider. This allows the ADP7118 to provide an output voltage from 1.2 V to VIN − VDO with high PSRR and low noise.

●User programmable soft start with an external capacitor is available in the LFCSP and SOIC packages.

●The ADP7118 is available in a 6-lead, 2 mm × 2 mm LFCSP making it not only a very compact solution, but it also provides excellent thermal performance for applications requiring up to 200 mA of output current in a small, low profile footprint. The ADP7118 is also available in a 5-lead TSOT and an 8-lead SOIC.

●Applications

● Regulation to noise sensitive applications

●– ADC and DAC circuits, precision amplifiers, power for VCO VTUNE control

● Communications and infrastructure

● Medical and healthcare

● Industrial and instrumentation

● Supported by ADIsimPower tool

●### Features and Benefits

● Low noise: 11 µV rms independent of fixed output voltage

● PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, VOUT ≤ 5 V, VIN = 7 V

● Input voltage range: 2.7 V to 20 V

● Maximum output current: 200 mA

● Initial accuracy: ±0.8%

● Accuracy over line, load, and temperature

● ±1.1%, TJ = −40°C to +85°C

● ±1.8%, TJ = −40°C to +125°C

● Low dropout voltage: 200 mV (typical) at a 200 mA load, VOUT = 5 V

● User programmable soft start (LFCSP and SOIC only)

● Low quiescent current, IGND = 50 μA (typical) with no load

● Low shutdown current: 1.8 μA atVIN = 5 V, 3.0 μA atVIN = 20 V

● Stable with a small 2.2 µF ceramic output capacitor

● Fixed output voltage options: 1.8V, 2.5V, 3.3V, 4.5 V, and 5.0V

● 16 standard voltages between 1.2 V and 5.0 V are available

● Adjustable output from 1.2 V to VIN – VDO, output can be adjusted above initial set point

● Precision enable

● 2 mm × 2 mm, 6-lead LFCSP, 8-Lead SOIC, 5-Lead TSOT