Product Details
●The ADN4661 is a single, CMOS, low voltage differential signaling (LVDS) line driver offering data rates of over 600 Mbps (300 MHz) and ultra-low power consumption. It features a flow-through pinout for easy PCB layout and separation of input and output signals.
●The device accepts low voltage TTL/CMOS logic signals and converts them to a differential current output of typically ±3.1 mA for driving a transmission medium such as a twisted-pair cable. The transmitted signal develops a differential voltage of typically ±355 mV across a termination resistor at the receiv-ing end, and this is converted back to a TTL/CMOS logic level by a line receiver.
●The ADN4661 and a companion LVDS receiver offer a new solution to high speed point-to-point data transmission, and a low power alternative to emitter-coupled logic (ECL) or positive emitter-coupled logic (PECL).
●Applications
● Backplane data transmission
● Cable data transmission
● Clock distribution
●### Features and Benefits
● ±15 kV ESD protection on output pins
● 600 Mbps (300 MHz) switching rates
● Flow-through pinout simplifies PCB layout
● 300 ps typical differential skew
● 700 ps maximum differential skew
● 1.5 ns maximum propagation delay
●|
● 3.3 V power supply
● ±355 mV differential signaling
● Low power dissipation: 23 mW typical
● Interoperable with existing 5 V LVDS receivers
● Conforms to TIA/EIA-644 LVDS standards
● Industrial operating temperature range (−40°C to +85°C)
●---|---
