| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 24 Pin |
| Supply Voltage (DC) | 5.50 V (max) |
| Case/Package (SI) | SOP |
| Case/Package | TSSOP |
| Contacts Type | SPST |
| Number of Channels | 8 Channel |
| Drain to Source Resistance (on) (Rds) | 4.50 Ω |
| Number of Bits | 8 Bit |
| Power Dissipation | 125 µW |
| Bandwidth | 155 MHz |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Bulk |
The ADG714BRUZ is a CMOS, octal SPST (single-pole, single-throw) Switch Controlled via either a 2 or 3-wire serial interface. On resistance is closely matched between switches and very flat over the full signal range. Each switch conducts equally well in both directions and the input signal range extends to the supplies. Data is written to these devices in the form of 8 bits, each bit corresponding to one channel. It uses a 3-wire serial interface that is compatible with SPI, QSPI and MICROWIRE and most DSP interface standards. The output of the shift register DOUT enables a number of these parts to be daisy chained. On power-up of these devices, all switches are in the OFF condition and the internal registers contain all zeros.
● SPI™/QSPI™/MICROWIRE™ Compatible interface
● ±2.5V Dual supply
● 0.6R Resistance flatness
● 100pA Leakage currents
● Octal SPST
● Power-On reset
● Fast switching times
● TTL/CMOS-compatible
●ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000V readily accumulate on the human body and test equipment and can discharge without detection.
ADI
ANALOG DEVICES ADG714BRUZ Analog Switch, Octal Channel, SPST, 8Channels, 4.5Ω, 2.7V to 5.5V, TSSOP, 24Pins
ADI
Interface IC - analogue switches Analog Devices ADG714BRUZ-REEL7 TSSOP 24
ADI
Analog Switch ICs 2.5Ω 2.7V CMOS Octal SPST
ADI
Analog Switch Octal SPST 24Pin TSSOP
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
