Product Details
●The AD9279 is designed for low cost, low power, small size, and ease of use for medical ultrasound and automotive radar. It contains eight channels of a variable gain amplifier (VGA) with a low noise preamplifier (LNA), an antialiasing filter (AAF), an analog-to-digital converter (ADC), and an I/Q demodulator with programmable phase rotation.
●Each channel features a variable gain range of 45 dB, a fully differential signal path, an active input preamplifier termination, and a maximum gain of up to 52 dB. The channel is optimized for high dynamic performance and low power in applications where a small package size is critical.
●The LNA has a single-ended-to-differential gain that is selectable through the SPI. Assuming a 15 MHz noise bandwidth (NBW) and a 21.3 dB LNA gain, the LNA input SNR is roughly 94 dB. In CW Doppler mode, each LNA output drives an I/Q demod-ulator that has independently programmable phase rotation with 16 phase settings.
●Power-down of individual channels is supported to increase battery life for portable applications. Standby mode allows quick power-up for power cycling. In CW Doppler operation, the VGA, AAF, and ADC are powered down. The ADC contains several features designed to maximize flexibility and minimize system cost, such as a programmable clock, data alignment, and programmable digital test pattern generation. The digital test patterns include built-in fixed patterns, built-in pseudo random patterns, and custom user-defined test patterns entered via the serial port interface.
●### Features and Benefits
●8 CHANNELS OF LNA, VGA, AAF, ADC, AND I/Q DEMODULATOR
● Lowpower : 141 mW per channel, TGC mode, 40 MSPS;
●60 mW per channel, CW mode
● 10 mm × 10 mm, 144-ball CSP-BGA
● TGC channel input-referred noise: 0.8 nV/√Hz, max gain
● Flexible power-down modes
● Fast recovery from low power standby mode: <2us
● Overload recovery: <10 ns
●LOW NOISE PREAMPLIFIER (LNA)
● Input-referred noise: 0.75 nV/√Hz , gain = 21.3 dB
● Programmable gain: 15.6 dB/17.9 dB/21.3 dB
● 0.1 dB compression: 1000 mV p-p/750 mV p-p/450 mV p-p
● Dual-mode active input impedance matching
● Bandwidth (BW) > 100 MHz
●VARIABLE GAIN AMPLIFIER (VGA)
● Attenuator range: −45 dB to 0 dB
● Postamp gain (PGA): 21 dB/24 dB/27 dB/30 dB
● Linear-in-dB gain control
●ANTIALIASING FILTER (AAF)
● Programmable second-order LPF from 8 MHz to 18 MHz
● Programmable HPF
●ANALOG-TO-DIGITAL CONVERTER (ADC)
● SNR: 70 dB, 12 bits up to 80 MSPS
● Serial LVDS (ANSI-644, Low power/reduced signal)
●CW MODE I/Q DEMODULATOR
● Individual programmable phase rotation
● Output dynamic range per channel: >160 dBc/√Hz
● Output-referred SNR: 155 dBc/√Hz, 1kHz offset, -3dBFS
