The AD8630ARZ is a Zero-Drift Rail-to-rail Input/Output Operational Amplifier features ultralow offset, drift and bias current. Operation is fully specified from 2.7 to 5V single supply. It provides benefits previously found only in expensive auto-zeroing or chopper-stabilized amplifier. No external capacitor is required. In addition, the AD8630 greatly reduces the digital switching noise found in most chopper-stabilized amplifier. With an offset voltage of only 1µV, drift of less than 0.005µV/°C and noise of only 0.5µV p-p (0 to 10Hz), the op amp is suited for applications where error sources cannot be tolerated. Position and pressure sensors, medical equipment and strain gage amplifiers benefit greatly from nearly zero drift over their operating temperature range. Many systems can take advantage of the rail-to-rail input and output swings provided by the AD8630 to reduce input biasing complexity and maximize SNR.
● Lowest auto-zero amplifier noise
● 1µV Maximum offset voltage
● 0.002µV/°C Input offset drift
● Rail-to-rail input and output swing
● Single-supply operation
● 130dB High gain, CMRR and PSRR
● 100pA Maximum input bias current
● 1mA Supply current
● 50µs Overload recovery time
● No external components required
●ESD sensitive device, take proper precaution while handling the device.
