AD822ARZ Datasheet PDF - ADI

The AD822ARZ is a rail to rail, FET input dual op amp (Operational Amplifier) in 8 pin NSOIC package. This dual precision, low power op amp can operate from single supply of 5V to 30V or dual supplies of ±2.5V to ±15V. It has true single supply capability with an input voltage range extending below negative rail allowing the AD822 to accommodate input signals below ground in single supply mode. Output voltage swing extends to within 10mV of each rail providing the maximum output dynamic range.

● Rail to rail output swings

● Capacitive load drive of 350pF at G = +1

● Minimum output current of 15mA

● 800µA maximum quiescent current per amplifier

● Unity gain bandwidth of 1.9MHz at VS = ±5 V

● Slew rate of 3V/µs

● 800µV maximum input offset voltage

● Low noise of 13nV/√Hz at 10KHz

● 25pA maximum input bias current

● Operating temperature range from -40°C to 85°C

●ESD (electrostatic discharge) sensitive device. Proper ESD precautions are recommended to avoid performance degradation or loss of functionality.