| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 16 Pin |
| Supply Voltage (DC) | 4.50 V (min) |
| Case/Package | SOIC |
| Clock Speed | 88.0 MHz, 80.0 MHz (max) |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Not Listed by Manufacturer |
The 74HCT4060D is a 14-stage Ripple-carry Counter/Divider And Oscillator with three oscillator terminals (RS, RTC and CTC), ten buffered parallel outputs (Q3 to Q9 and Q11 to Q13) and an overriding asynchronous master reset (MR). The oscillator configuration allows design of either RC or crystal oscillator circuits. The oscillator may be replaced by an external clock signal at input RS. In this case, keep the oscillator pins (RTC and CTC) floating. The counter advances on the high-to-low transition of RS. A high level on MR clears all counter stages and forces all outputs low, independent of the other input conditions. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
● On-chip component
● RC or crystal oscillator configuration
● CMOS Input level
● Complies with JEDEC standard No. 7A
NXP
Counter Single 14Bit Binary UP 16Pin SO T/R
NXP
IC HCT SERIES, ASYN NEGATIVE EDGE TRIGGERED 14Bit UP BINARY COUNTER, PDSO16, 3.9MM, PLASTIC, MS-012, SOT-109, SOP-16, Counter
NXP
NXP 74HCT4060D,652 Binary Ripple Counter, HCT Family, 88MHz, 1Circuits, 4.5V to 5.5V, SOIC-16
NXP
Counter Single UP Counter 16Pin SSOP T/R
NXP
Counter Single 14Bit Binary UP 16Pin SSOP T/R
NXP
NXP 74HCT4060N Binary Ripple Counter, HCT Family, 88MHz, 1 Gate, 1Input, 4.5V to 5.5V, DIP-16
NXP
Counter Single 14Bit Binary UP 16Pin SSOP Tube
NXP
74HC(T)4060 - 14-stage binary ripple counter with oscillator DIP 16Pin
Philips
74HC/HCT4060 14-stage binary ripple counter with oscillator
NXP
Counter Single 14Bit Binary UP Automotive 16Pin SO T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
