| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Frequency | 36.0 MHz |
| Number of Pins | 20 Pin |
| Digital Logic Level | TTL |
| Supply Voltage (DC) | 5.00 V, 5.50 V (max) |
| Case/Package | DIP |
| Output Current | 4.00 mA |
| Number of Circuits | 8 Circuit |
| Number of Bits | 8 Bit |
| Polarity | Non-Inverting |
| Number of Gates | 8 Gate |
| Input Capacitance | 3.50 pF |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Not Listed by Manufacturer |
| Packaging | Tube |
The 74HCT273N is an octal positive-edge triggered D-type Flip-flop features clock and master reset (MR\\) inputs. The outputs Qn will assume the state of their corresponding Dn inputs that meet the set-up and hold time requirements on the low-to-high clock transition. A low on MR\ forces the outputs low independently of clock and data inputs. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
● Common clock and master reset
● TTL Input levels
● Complies with JEDEC standard No. 7A
NXP
NXP 74HCT273N Flip-Flop, 74HCT273, D, 16ns, 36MHz, 4mA, DIP
NXP
Flip Flop D-Type Bus Interface Pos-Edge 1Element 20Pin SO
NXP
NXP 74HCT273D,653 Flip-Flop, Non Inverted, Positive Edge, 74HCT273, D, 36MHz, 25mA, SOIC
NXP
Flip Flop D-Type Bus Interface Pos-Edge 1Element 20Pin TSSOP T/R
NXP
NXP 74HCT273N,652 Flip-Flop, 74HCT273, D, 16ns, 56MHz, 5.2mA, DIP
NXP
Flip Flop D-Type Bus Interface Pos-Edge 1Element 20Pin TSSOP Tube
NXP
Flip Flop D-Type Bus Interface Pos-Edge 1Element 20Pin SO Bulk
NXP
Flip Flop D-Type Bus Interface Pos-Edge 1Element 20Pin DHVQFN EP T/R
NXP
Flip Flop D-Type Bus Interface Pos-Edge 1Element 20Pin SSOP Tube
NXP
IC HCT SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PDSO20, 4.4MM, PLASTIC, MO-153, SOT-360-1, TSSOP-20, FF/Latch
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
