| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Frequency | 65.0 MHz |
| Number of Pins | 48 Pin |
| Supply Voltage (DC) | 4.50 V to 5.50 V |
| Case/Package | SSOP |
| Number of Outputs | 16 Output |
| Output Voltage | 5.00 V |
| Output Current | 24.0 mA |
| Number of Bits | 16 Bit |
| Propagation Delay Max (tpd) | 12.4 ns |
| Polarity | Non-Inverting |
| Voltage Nodes | 5.00 V |
| Power Dissipation | 1.20 W |
| Output Current Drive | -1.00 mA |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
Look no further than Texas Instruments" 74ACT16374DL flip flop device, a great device for storing simple state information. It has a single-ended output signal. With a 3-state output, this is power management at its best. This flip flop has a minimum operating temperature of -40 °C and a maximum of 85 °C. This device comes in tube packaging. It has 16 channels per chip. This non-inverting device has a typical operating supply voltage of 5 V. Its minimum operating supply voltage of 4.5 V, while its maximum is 5.5 V.
TI
16Bit D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS
TI
16Bit D-Type Edge-Triggered Flip-Flops With 3-State Outputs 48-SSOP -40℃ to 85℃
TI
TEXAS INSTRUMENTS 74ACT16374DL Flip-Flop, Tri State Non Inverted, Positive Edge, 74ACT16374, D, 8.8ns, 65MHz, 24mA, SSOP
TI
16Bit D-Type Edge-Triggered Flip-Flops With 3-State Outputs 48-SSOP -40℃ to 85℃
TI
16Bit D-Type Edge-Triggered Flip-Flops With 3-State Outputs 48-SSOP -40℃ to 85℃
Fairchild
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 2Element 48Pin SSOP W Rail
Fairchild
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 2Element 48Pin TSSOP W Rail
Fairchild
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 2Element 48Pin SSOP W T/R
ST Microelectronics
IC FLIP FLOP 16Bit D 48-TSSOP
Fairchild
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 2Element 48Pin TSSOP W T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
