LMC6035 Datasheet PDF

●The LMC6035IM is a low power CMOS dual Operational Amplifier capable of rail-to-rail output swing into loads of 600R. It allows for single supply operation and is ensured for 2.7, 3, 5 and 15V supply voltage. The 2.7V supply voltage corresponds to the end-of-life voltage (0.9V/cell) for three NiCd or NiMH batteries in series, making the LMC6035 well suited for portable and rechargeable systems. It also features a well behaved decrease in its specifications at supply voltages below its ensured 2.7V operation. This provides a comfort zone for adequate operation at voltages significantly below 2.7V. Its ultra low input currents (IIN) makes it well suited for low power active filter application, because it allows the use of higher resistor values and lower capacitor values. In addition, the drive capability of the LMC6035 gives this op amp a broad range of applications for low voltage systems.

● 20fA Ultra low input current

● 126dB High voltage gain

● -0.1 to 2.3V at VS=2.7V Wide input common-mode voltage range

● 0.01% at 10kHz Low distortion

● 2.3µV/°C Typical offset drift

● 96dB Typical CMRR

● Green product and no Sb/Br