LM6132 Datasheet PDF

●The LM6132AIM is a dual low power 10MHz rail-to-rail I/O Operational Amplifier provides new levels of speed verses power performance in applications where low voltage supplies or power limitations previously made compromise necessary. With only 360µA/amp supply current, the 10MHz gain-bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life. The LM6132 can be driven by voltages that exceed both power supply rails, thus eliminating concerns over exceeding the common-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages. The op-amp can also drive large capacitive loads without oscillating. Operating on supplies from 2.7V to over 24V, the op-amp is excellent for a very wide range of applications, from battery operated systems with large bandwidth requirements to high speed instrumentation.

● 100dB CMMR

● 82dB PSRR

●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.